Challenge SS20CSDRI Original Instruction Manual page 9

Operating Instructions
WARNING: Do not suggest to use screw bit shorter than 25mm. When insert into
the bit holder, it is difficult to pull it out.
2. FORWARD/REVERSE SWITCH
For drilling and screw driving use forward rotation marked "
switch (3) is moved to the left). Only use reverse rotation marked "
Reverse switch (3) is moved to the right) to remove screws .
WARNING: Never change the direction of rotation when the chuck is rotating.
Wait until it has stopped!
3. ROTARY BUTTON
Rotary button can change hand by two different handle positions. 2-Handle-Position
gives you different options when you are working in different circumstances. Make it
straight while you need longer extension in narrow place.
WARNING: Never use rotary button when the tool is working.
Wait and use it until it stops.
4. ON / OFF SWITCH
Depress the On/Off switch to start and release it to stop your screwdriver.
5. USING THE SIGHTLIGHT
To turn on the light simply press the on/off switch. When you release the on/off switch,
the light will be off.
Customer Helpline 0345 640 0800
" (Forward/Reverse
" (Forward/
9