In The Box - Challenge SS20CSDRI Original Instruction Manual

Safety Information
Important - Please read these instructions fully before starting assembly
Additional Safety Instructions For Your Battery Charger
15. When charging batteries, ensure that the battery charger is in a well-ventilated area and
away from inflammable materials. Batteries can get hot during charging. Do not overcharge
any batteries. Ensure that batteries and chargers are not left unsupervised during charging.
16. Do not recharge non-rechargeable batteries, as they can overheat and break.
17. Longer life and better performance can be obtained if the power tool is charged
when the air temperature is between 18ºC and 24ºC. Do not charge the power tool
in air temperatures below 4ºC, or above 40ºC. This is important as it can prevent
serious damage to the power tool.
18. Charge only power tool of the same model provided by manufacturer and of models
recommended by manufacturer.

In The Box

Parts
BITS HOLDER
1
SIGHT LIGHT
2
FORWARD/REVERSE SWITCH
3
ON/OFF SWITCH
4
1
2
3
4
Customer Helpline 0345 640 0800
ROTARY BUTTON
5
CHARGING PORT
CHARGING INDICATOR
7
SOFT GRIP
8
5
6
7
8
7