Trouble Shooting; Maintenance; Technical Data - Challenge SS20CSDRI Original Instruction Manual

Trouble Shooting

Problem
Battery will not
charge
Switch cannot be
pressed

Maintenance

Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the ventilation slots. This is normal
and will not damage your power tool.

Technical Data

Technical Data Table
Voltage
Battery capacity
No-load speed
Max torque
Charging time
Charger input
Charger output
Machine weight
10
Possible cause
1. Charger not plugged into a
working outlet.
2. Surrounding air temperature
is too hot or too cold.
Forward/Reverse switch at
middle position
Customer Helpline 0345 640 0800
1. Plug charger into a working
outlet. Check current by plugging
in a lamp.
2. Move charger to an appropriate
place which temperature is
suitable for the charger.
Make sure switch is on Forward or
Reverse rotation according to
project need.
3.6V DC
1.3Ah Lithium-ion (4.68Wh)
180/min
4 N.m
3-5hrs
100-240V ~ 50/60Hz 0.2A
5V 600mA
300g
Solution