Challenge SS20CSDRI Original Instruction Manual page 11

Technical Data
Noise Information
A weighted sound pressure
A weighted sound power
Wear ear protection
Vibration Information
Vibration total values (triax vector sum) determined according to EN 62841
Typical weighted vibration
The declared vibration total value may be used for comparing one tool with another, and
may also be used in a preliminary assessment of exposure.
Vibration Information
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being inflating.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle but not actually doing the
job.
This may significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 45
Plan your work schedule to spread any high vibration tool use across a number of days.
Vibration emission value a
Uncertainty K = 1.5m/s²
C or more.
0
Customer Helpline 0345 640 0800
L : 73.6dB(A)
pA
L : 84.6dB(A)
wA
K & K = 3.0dB(A)
pA wA
80dB(A)
= 2.141m/s²
h, D
11