Table of Contents
Advertisement
daytime riding light and switch
on the low-beam headlight and
front side light.
NOTICE
If the high-beam headlight is
switched on while the daytime
riding light is on, the daytime
riding light is switched off after
approx. 2 seconds and the
high-beam headlight, low-beam
headlight and front side light are
switched on.
If the high beam headlight is
switched off again, the daytime
running light is not automat-
ically reactivated, but must be
switched on again if required.
Automatic daytime riding
light
WARNING
The automatic daytime rid-
ing light does not replace the
https://www.motorcycle-manual.com/
personal assessment of the
light conditions
Risk of accident
Switch off the automatic day-
time riding light in poor light
conditions.
NOTICE
The changeover between
daytime riding light and low-
beam headlight including front
side lights can be effected
automatically.
Navigate to Settings,
Vehicle settings, Lights
and switch on the Auto.
daytime light function.
The indicator light for the
automatic daytime riding
light lights up.
If the ambient brightness
decreases below a certain
value, the low-beam headlight
is automatically switched
on (e.g. in a tunnel). When
sufficient ambient brightness is
detected, the daytime riding
light is switched back on.
The indicator light for the
daytime riding light shows if
the daytime riding light is active.
Manual operation of the
light when the automatic
system is switched on
If you press the button for the
daytime riding light the daytime
riding light is switched off and
the low-beam headlight and
front side lights are switched
on (e. g. when you ride into
a tunnel, and the response of
the automatic daytime riding
light to the change in ambient
brightness is delayed).
If you press the button again
the daytime riding light is re-
activated, in other words the
daytime riding light is switched
4
73
z
Advertisement
Table of Contents
