Table of Contents
Advertisement
to disconnect the battery from
9
the motorcycle's on-board sys-
tems. You can obtain additional
182
information from your authorised
BMW Motorrad dealer.
Charging battery when
connected
Disconnect devices plugged
into the sockets.
ATTENTION
Charging the battery that is
z
connected to the vehicle via
the battery terminals
Damage to the on-board elec-
tronics
Disconnect the battery at
the battery terminals before
charging.
ATTENTION
Unsuitable chargers connec-
ted to a socket
Damage to charger and vehicle
electronics
Use suitable BMW chargers.
The suitable charger is
available from your authorised
BMW Motorrad dealer.
ATTENTION
Recharging a fully
discharged battery via the
power socket or extra socket
Damage to the vehicle electron-
ics
If a battery has discharged to
the extent that it is completely
flat (battery voltage less than
12 V, indicator lights and mul-
tifunction display remain off
when the ignition is switched
on) always charge the discon-
nected battery with the char-
ger connected directly to the
battery terminals.
With the battery connected to
https://www.motorcycle-manual.com/
the vehicle's on-board electrical
system, charge via the power
socket.
NOTICE
The motorcycle's on-board elec-
tronics know when the battery
is fully charged. The on-board
socket is switched off when this
happens.
Comply with the operating in-
structions of the charger.
NOTICE
If you are unable to charge the
battery through the on-board
socket, you may be using a char-
ger that is not compatible with
your motorcycle's electronics. In
this case, directly charge the bat-
tery at the terminals of the bat-
tery that has been disconnected
from the vehicle.
Advertisement
Table of Contents
