Removing Seat Pad Set For Cleaning; Cleaning And Installing Seat Pad Set - Cosco APT 50 Instructions Manual

49
7 Rotate Metal Retainer and
Push It Up Through Shell and
Pad As Shown
From Top of Car Seat, Pull
8
Buckle Out of Shell
9
Pull Harness System
Completely Out of Shell
and Pad

Removing Seat Pad Set for Cleaning

You must remove the harness system and the accessories in
order to remove the seat pad for cleaning.
To remove the harness system, see pages 47-49.
Removing Seat Pad
Pull the pad off the top of the car
seat and remove it from the shell.
Cleaning and Installing Seat Pad
Cleaning Seat Pad
Machine wash separately with cold water on a gentle cycle. Do not use
bleach. Tumble dry separately for 10-12 minutes on low heat. Remove
immediately.
Cleaning Harness Strap
Check the harness straps often for any wear or damage.
Spot clean using warm sudsy water and damp cloth.
Spilled food and liquids on the car seat may result in mold or
bacterial growth over time. These spills could also attract insects
or rodents.
Installing Seat Pad
Starting from the bottom of the car seat, slip the pad on the shell. Pull
the harness adjustment strap through the pad. Wrap the pad around
the top of the shell. Install the harness system, see pages 51-53.
Do not use the child restraint without the seat pad or
with damaged harness straps.
50