•
Before you use the appliance for the À rst
time, thoroughly clean the parts that come
into contact with food.
•
Before you remove accessories or clean
the motor unit, switch off and unplug the
appliance.
•
Do not immerse the motor unit in water
nor rinse it under the tap.
•
Do not clean the metal parts in a
dishwasher.
•
Clean the main unit with a moist cloth.
•
Pass pieces of bread through the cutter
housing to remove any meat left.
•
Wash removable parts with a soft brush in
soapy water, rinse them with clear water,
and then dry them with soft cloth or
tissues immediately.
•
Lightly brush the metal parts with fat or oil
to prevent rusting.
Tip
•
Use a toothpick to remove the remains stuck in the
grinding discs, cookie makers, and metal drums.
Replace the gear
One extra gear is bundled with the product. If
the original gear is broken, replace it with the
extra one.
1
Loosen the screw of the gear with a
screwdriver.
2
Remove the gear, seal ring and screw from
the worm shaft.
3
Place the seal ring and then the new gear
onto the worm shaft, and fasten it with the
screw.
Store the product
•
Push the power cord into the integrated
cord storage.
•
Store the product under dry circumstances
and normal temperature.
EN
21