Valley Electronics daysy Instructions For Use Manual page 18

18
Cleaning
– Clean Daysy before and after every use
– Use a damp cloth to carefully clean the sensor on your Daysy. You can also
use a little alcohol or soap if you wish. Since your Daysy is not waterproof,
make sure that only the neck on the sensor and not the whole appliance
comes into contact with water.
Battery
– A single battery charge will last 1 to 2 months, depending on how often you
use your Daysy. To indicate that the battery is nearly empty, the activation
ring on your Daysy will flash at frequent intervals. Make sure you charge the
battery within a week. With normal use, the battery will still charge to 80% of
its capacity after 500 charging cycles.
– Note: You should not take measurements when your Daysy is charging.