Valley Electronics daysy Instructions For Use Manual page 14

14
Step 3: Entering your
menstruation on your Daysy
If the violet "Menstruation" light is flashing in the activation ring, it means
that Daysy is asking you for your menstruation input.
– Menstruating? "Yes": Confirm you are menstruating by pressing the activation
button until the violet light lights up without flashing and you hear a "beep-
beep". Confirm you are menstruating for each day of active bleeding and flow
for a minimum of three consecutive days.
– Menstruating? "No": You do not have to do anything; the violet light keeps flashing.
– You are menstruating, but Daysy is not showing the flashing violet light:
Enter your menstruation input by holding down the activation button until
the violet light is constantly lit.
Important: The first time you start bleeding after you stop taking the pill, or stop using other hormonal
methods of birth control, is referred to as hormonal withdrawal bleeding and does not mean that you
are menstruating. Under no circumstances should you enter this bleeding as menstruation.