Valley Electronics daysy Instructions For Use Manual page 10

10
Step 1: Charging and
activating your Daysy
1. Connect your Daysy to the micro USB cable supplied in your package.
2. Connect the cable to a USB port. Make sure it is a 5V port that
does not supply more than a 1A current.
3. As your Daysy charges, the blue light on the activation ring
will move from the bottom upward. All the blue lights will light
up once the battery is fully charged.
4. Disconnect the cable from your Daysy. You can now switch your Daysy on
by briefly pressing the activation button.