Tiger Generation Module: Positions Of Connectors - Electrolux DOMINO with TIGER Service Manual

3.2.3 - TIGER GENERATION MODULE: POSITIONS OF CONNECTORS

Fig. 15
B71 CONNECTOR FOR FRONT COIL TEMPERATURE SENSOR
B77 CONNECTOR FOR FINAL TEMPERATURE SENSOR
B81 CONNECTOR FOR REAR COIL TEMPERATURE SENSOR
BA81 PROGRAMMING CONNECTOR (CONTROL)
BA91 PROGRAMMING CONNECTOR (POWER)
BC1 CONNECTOR FOR MODULE CONFIGURATION JUMPER (*)
BC3 (NOT USED)
BC4 INSULATED COMMS CONNECTOR (TO CONTROL UNIT)
BC5 CONNECTOR FOR MODULE CONFIGURATION JUMPER (*)
BP06 FASTON - MAIN PILOT LAMP
BP09 FASTON - MAIN PILOT LAMP
BPL1 POWER SUPPLY (LIVE)
BPL2 POWER SUPPLY (LIVE)
BPN1 POWER SUPPLY (NEUTRAL)
BPN2 POWER SUPPLY (NEUTRAL)
BS1 CONNECTOR FOR COOLING FAN
EARTH1 FASTON FOR FRAME EARTH
EARTH2 FASTON FOR FRAME EARTH
TAB1 FRONT COIL POWER SUPPLY TERMINAL (BLACK)
TAB101 REAR COIL POWER SUPPLY TERMINAL (BLACK)
TAB102 REAR COIL POWER SUPPLY TERMINAL (RED)
TAB2 FRONT COIL POWER SUPPLY TERMINAL (RED)
(*) N.B.:
SOI 05.09 FV
For information regarding the configuration jumper, refer to paragraph "3.2.1 -
JUMPER FOR CONFIGURATION OF MODULE"
12/36 599 71 58-20