Calibrating Your Screen - Epson GT-10000+ User Manual

Scanner utility programs, scan server, twain pro network

Hide thumbs Also See for GT-10000+:

Table of Contents

Calibrating Your Screen

You need to calibrate your screen so that scanned images will be

reproduced on the screen as closely as possible to the original.

During the installation of EPSON TWAIN Pro Network software,

the calibration utility automatically starts and you can calibrate

your screen at that point.

To manually start the calibration utility, follow the instructions

for your system below.

For Windows 95 and NT 4.0 users:

Click Start and point to Settings, then select Control Panel. Then

double-click the EPSON TWAIN Pro Network icon and click the

Calibration Utility button in the EPSON TWAIN Pro Network

setup dialog box.

For Windows 98 and 2000 users:

Click Start and point to Settings, then select Control Panel. Then

double-click the Scanners and Cameras icon. Select EPSON GT-

10000 from the list when the Scanners and Cameras Properties

dialog box appears, then click the Properties button. When the

EPSON GT-10000 Properties dialog box appears, click the Utility

tab and then the Screen Calibration Utility button.

To calibrate your screen follow the steps below:

Installing the Software

1-19

Table of Contents