Philips HR2160/50 User Manual page 11

Tips
- When you process a large quantity, we advise you not to put all the ingredients in the filter at
the same time. Start to process a small quantity and let the appliance run for a few seconds.
Then switch off the appliance and add another small quantity. Repeat this procedure until you
have processed all the ingredients. Always keep the lid on the blender jar during processing.
- To get the best result when you make fruit juices and cocktails, add approx. 300ml water to
150g fruit. You can also use other liquids, e.g. to make cocktails.
- To make tomato juice, cut the tomatoes in four and drop the pieces through the opening in the
lid onto the rotating blades.
Mill (HR2168/HR2167/HR2161 only)
You can use the mill to grind and chop ingredients such as peppercorns, sesame seeds, rice, wheat,
coconut flesh, nuts (shelled), coffee beans, dried soy beans, dried peas, cheese, breadcrumbs, etc.
Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
The mill is not suitable for chopping very hard ingredients like nutmeg and ice cubes.
Do not exceed the maximum level indicated on the mill beaker.
Preparing the mill for use
1 Put the ingredients in the mill beaker (Fig. 10).
Note: See the mill table at the end of this user manual for the recommended quantities and processing
times.
2 Screw the mill blade unit clockwise onto the mill beaker (Fig. 11).
3 Turn the assembled mill upside down and screw it clockwise onto the motor unit (Fig. 12).
Using the mill
1 Switch on the appliance.
We advise you to use the pulse setting or speed setting 5.
Never let the mill run for more than 30 seconds without interruption.
2 When you have finished processing, set the control knob to 0 and unplug the appliance.
3 To remove the mill from the motor unit, turn the mill anticlockwise.
Chopper (HR2168 only)
You can use the chopper to chop ingredients such as onions, meat, herbs, vegetables, fruit, chocolate,
firm cheese, baby food and nuts.
HR2170/HR2161/HR2160: You can order the chopper (type number HR2965) from your Philips
dealer.
Do not use the chopper to mix liquids. Use the blender for this purpose.
1 Insert the coupling unit of the chopper into the bottom of the chopper bowl (1). Turn the
coupling unit anticlockwise to fix it (2) (Fig. 13).
2 Place the chopper bowl (1) on the motor unit and turn it clockwise to fix it (2). (Fig. 14)
3 Place the chopper blade unit in the chopper bowl (Fig. 15).
4 Put the ingredients in the chopper bowl (Fig. 16).
EnglisH
11