Neopost DS-75i Manual page 86

3. Remove all documents and envelopes and close all covers before starting the diagnose.
4. Tap [Start test].
5. When the test is finished, the Status report is shown, showing the status of all tested
items. If the tests fail, contact your service organization.
6
When too much paper dust is built up at the sensors a warning message will be displayed.
To check the conditions of the photocells or to calibrate them follow the instructions as
described in
Reading
The reading menu contains the configuration items for the reading functions. Because
reading is optional, this menu is only available when there is at least one reading license
present. For more information on the reading option, see
82
Inserter photocells
Calibrate photocells
Reading
on page 113.
Reading on page 92.