Table of Contents
Advertisement
5
2.
Squeeze the two blue handles A and B and shift the feeding plate C as far as possible
to the front.
3.
Push knob D forward until it clicks.
4.
Place a document/BRE on the feeder tray and slide it in the system till the leading
edge is not visible anymore. Turn knob D counterclockwise if the separation is set to
narrow.
5.
Push the document/BRE between the rollers.
6.
Turn knob D clockwise to get more resistance and counterclockwise if the separation
is set to narrow.
The separation is adjusted correctly when a slight resistance is felt on the
document/BRE.
7.
Pull knob D back when ready.
8.
Replace the document feeder trays 2 and 3.
58
The lowest feeder is feeder 1.
- Quick Links:
- User Guide
Hide quick links:
Advertisement
Table of Contents
