Neopost DS-75i Manual page 36

4. Tap the reset button for the Job total counter to set it to zero.
4
5. Tap [OK] to go back to the job overview screen and tap [Start].
Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
In this screen you can change the following settings:
• Move documents between feeders (see
• Link feeders (see
• Change the counter settings (see
When you are ready with these settings, proceed as follows:
1. Load the documents as indicated on the Job info screen (refer also to
documents
32
If you set the Job total counter to zero the number history of this
job will be lost.
Link feeder trays
on page 51).
Change to an other feeder tray
on page 45)
Change the counter
on page 44)
settings)
Load the