Filter Replacement; Motor Protection Filter - Philips FC8380/01 User Manual

ENGLISH
8

Filter replacement

AFS Micro Filter
Replace the AFS Micro Filter every 6 months.
The AFS Micro Filter will remove a large part of the smallest particles
from the exhaust air.
C
1 Open the grill and remove the filter
C
2 Place the sides (1, 2) and the bottom edge (3) of the new filter
properly behind the ridges of the holder.
C
3 Put the holder back into the vacuum cleaner by first hooking
the bottom edge of the holder into the appliance (1) and then
pushing the holder towards the appliance (2) until it snaps
home.
Make sure the filter holder has been placed properly.

Motor Protection Filter

Replace the Motor Protection Filter once a year.
If you are using the cotton dustbag, wash the Motor Protection Filter in
lukewarm water once a year.
Make sure the Motor Protection Filter is completely dry before you
put it back into the appliance.
C
1 Switch the appliance off and open the cover.Take out the filter
holder and remove the filter.
2 Insert a new filter into the holder with the white side facing
upwards and place the holder back.
Two AFS Micro Filters and one Motor Protection Filter are available
under type number FC8032.