Table of Contents
Advertisement
SAFETY MAINTENANCE INFORMATION
SAFETY MAINTENANCE INFORMATION
WARNING TAG
Always attach the "DO NOT OPERATE" warning tag to the work
equipment control lever in the operator's cab to alert others that
you are performing service or maintenance on the machine.
Attach additional warning tags around the machine if necessary.
Warning tag Part No. 09963-A1640
Keep this warning tag in the tool box while it is not used. If there
is not the tool box, keep the tag in the operation manual pocket.
If others start the engine, or touch or operate the work
equipment control lever while you are performing service or
maintenance, you could suffer serious injury or property
damage.
KEEP WORK PLACE CLEAN AND TIDY
Do not leave hammers or other tools lying around in the work place. Wipe up all grease, oil, or other substances
that will cause you to slip. Always keep the work place clean and tidy to enable you to carry out operations safely.
If the work place is not kept clean and tidy, there is the danger that you will trip, slip, or fall over and injure yourself.
When cleaning the ceiling window which is made of organic glass (polycarbonate), use tap water and avoid use
of organic solvents for cleaning. An organic solvent like benzene, toluene or methanol can invite a chemical
reaction like dissolution and decomposition on the window glass, deteriorating polycarbonate in use.
APPOINT LEADER WHEN WORKING WITH OTHERS
When repairing the machine or when removing and installing the work equipment, appoint a leader and follow his
instructions during the operation.
2 - 32
SAFETY
Advertisement
Chapters
Table of Contents
