Table of Contents
Advertisement
MAINTENANCE PROCEDURE
Cleaning Outer Element
1. Open the right door of the machine, remove 6 hooks (2), then
remove cover (3).
NOTICE
Before and after cleaning the element, do not leave or keep it in direct
sunlight.
2. Hold the outer element, rock it lightly up and down and to the left and right, and rotate the element to the left and
right to pull it out.
NOTICE
Never remove the inner element. It will allow dirt to enter and cause
failure of the engine.
Do not use a screwdriver or any other tool.
3. After removing the outer element, cover the air connector
inside the air cleaner body with a clean cloth or tape to prevent
dirt or dust from entering.
4. Wipe off or brush off the dirt stuck to cover (3) and the inside of
the air cleaner body.
4 - 20
MAINTENANCE
Advertisement
Chapters
Table of Contents
