Philips FC9308/01 User Manual page 14

Silentstar vacuum cleaner with silentseal nozzle
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
English
14
2
Press the cord rewind button to rewind the mains cord.
3
Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
-
To ensure stable parking of the telescopic tube, adjust the tube to the
shortest length.
Tip: We advise you to wrap the hose around the tube to ensure stable parking
and to save even more space when you store the appliance.
replacing the dustbag
Tip: We advise you to clean the motor protection filter every time you replace
the dustbag (see chapter 'Cleaning and maintenance of filters').
Always unplug the appliance before you replace the disposable dustbag.
Before replacing the dustbag
In some cases, the dustbag full indicator can indicate that the dustbag is
full, even though it is not. This may occur if the pores of the dustbag are
clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust
and similar substances) or if something is blocking the nozzle, tube and/
or hose. If the pores of the dustbag are clogged, you have to replace the
disposable dustbag, even if it is not full yet. If the dustbag is not clogged but
not full either, something is blocking the nozzle, tube and/or hose. In this
case, do not replace the dustbag but remove the obstruction.
replacing the disposable dustbag
-
Replace the dustbag as soon as the dustbag-full indicator has changed
colour permanently, i.e. even when the nozzle is not placed on the
floor.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Silentstar fc9308

Table of Contents