Table of Contents
Advertisement
Available languages
Available languages
English
12
accessory holder
1
Slide the accessory holder with accessories onto the handgrip
('click').
2
To detach the accessory holder, squeeze the release levers
together (1) and slide the accessory holder off the handgrip (2).
remote control operation
-
The remote control has three buttons with which you operate the
vacuum cleaner. With the '+' and '-' buttons you adjust the suction
power and with the standby button you switch the appliance to
standby mode.
Note: The functions on the remote control only work after you have switched
on the appliance with the on/off switch on the appliance itself.
Note: Replace the batteries when the 'infrared active light' does not light up
when you press any button. See chapter 'Replacement' to replace the batteries.
using the appliance
1
Pull the cord out of the appliance and put the mains plug in the wall
socket.
2
To switch on the appliance, press the on/off button on top of the
appliance.
Tip: To avoid bending your back, press the on/off button with your foot.
3
To switch off the appliance, press the on/off button on top of the
appliance.
adjusting suction power
1
During vacuuming, you can adjust the suction power level with the –
and + buttons on the remote control.
Advertisement
Table of Contents
