Quick Use Instructions - Minolta MNCD36 User Manual

1.5 Startup
1.5.1 In-Car Use
Connect the included auxiliary DC power adaptor to your car's power port. Plug the USB
plug into the camcorder's USB port. Charging will begin immediately. Please note that the
camcorder's internal battery has a very limited capacity and is only intended for use in
emergency use situations.
1.5.2 USB Cord / Computer Use
Connect the included USB cable to a free USB port on your computer, and connect the
other end of the cable into the camcorder's USB port. The battery may be charged while
the camcorder is powered on or off.
While charging, the red power indicator LED will illuminate. When charging is complete, the
power indicator LED will automatically turn off.
2. USING YOUR CAMCORDER

Quick Use Instructions

Simply insert the MicroSD memory card into the MicroSD card slot, and insert the auxiliary
power adaptor into the camcorder's USB port and your car's power port. The camcorder will
automatically power on and begin recording a video file.
To start or stop recording at any time, press the OK/RECORD button. You may also remove
the auxiliary DC power adaptor at any time to automatically save a recording and power the
camcorder off. Just mount it to your windshield, plug in the power and drive!