Minolta MNCD36 User Manual page 18

4.4.5 Frequency
This setting allows you to set the power frequency of your camcorder. This setting is
dependent on the region that the camcorder is being used in.
1. In any mode, press the MENU button twice. Select 'Language' by using the UP or
DOWN buttons. Press the OK/RECORD button to enter the 'Language' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from 50Hz and 60Hz. The setting for North America is 60Hz.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
4.4.6 Format Memory Card
This setting allows you to erase all video and photo files stored on your memory card.
1. In any mode, press the MENU button twice. Select 'Format Memory Card' by using the
UP or DOWN buttons. Press the OK/RECORD button to enter the 'Format Memory
Card' submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from NO and YES.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
NOTE: There is no way to recover formatted media. Once you format your memory card,
the previously stored file cannot be recovered. Use extreme caution when accessing this
setting.
4.4.7 Reset To Default
This setting allows you to reset all menu settings to the factory default settings. This function
will not delete any media stored on your memory card.
1. In any mode, press the MENU button twice. Select 'Reset To Default' by using the UP
or DOWN buttons. Press the OK/RECORD button to enter the 'Reset To Default'
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from NO and YES.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.