Minolta MNCD36 User Manual page 10

1. In VIDEO mode, press the MENU button. Select 'Loop Recording' by using the UP or
DOWN buttons. Press the OK/RECORD button to enter the 'Loop Recording'
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from OFF, 1 Minute Loop, 3 Minute Loop and 5 Minute Loop.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
4.1.3 Audio Recording
This setting allows you to select the built-in microphone ON or OFF during a video recording.
Once you select an option, your camcorder will either record audio within the video file, or
record a video file without the audio.
1. In VIDEO mode, press the MENU button. Select 'Audio Recording' by using the UP or
DOWN buttons. Press the OK/RECORD button to enter the 'Audio Recording'
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from OFF and ON.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.
4.1.4 Motion Detection
This setting automatically begins recording if movement is detected in front of the camcorder
lens. Once recording, the camcorder will stop recording if not further movement is detected
within a 10-second period of the last movement registered. You may also manually stop
recording anytime by pressing the OK/RECORD button during a recording.
1. In VIDEO mode, press the MENU button. Select 'Motion Detection' by using the UP or
DOWN buttons. Press the OK/RECORD button to enter the 'Motion Detection'
submenu.
2. Press the UP or DOWN buttons again to navigate the submenu, and select a setting.
You can select from OFF and ON.
3. Press the OK/RECORD button to confirm your selected setting.
4. To exit the settings menu, press the MENU button twice and your camcorder will return
to the main status screen of the current mode.