jbc JT Series Reference Manual

JT High-Power hot-air station
120V - Ref. JT-1A | 230V - Ref. JT-2A
BASIC SPECIFICATIONS:
Air pump for hot-air with electronic control of temperature and air flow.
Vacuum pump for holding ICs
Maximum Power: 1000 W.
Temperature selection: ºC or ºF, Room - 450° C and cool
Air flow regulation: 6-45 l/min.
The system is protected against antistatic discharge.
Weight of complete system: 8,7 kg.
JT-2A High power hot air station 230V
The JT-2A is a high power hot air station used for desoldering all types of SMDs.
Its powerful heater enables quick and safe desoldering of even the biggest QFPs and PLCCs. In addition, it desolders small and
medium sized BGA's in a very reduced time span. Digital read-out temperature allows more precision and tool control.
The system, exclusive to JBC, uses extractors/protectors and hot air, to desolder in a quick, safe and clean way while protecting the
surrounding components by concentrating the heat onto the IC. A medium-sized QFP, for example, can be desoldered in 20
seconds.
(*The JT-Q is the same hot-air station but is supplied whithout accessories.)
Connectable tools:
JT heater
Includes:
120V - Ref. JT-1A
230V - Ref. JT-2A
JT control unit
1000 W heater.
JT Extractor stand.
5 extractors, 5 shields and 2 tripods.
JT-SA stand
Accessories set