Maintenance - Xiaomi Mi Smart Fan Manual

Standalone fan-mode
To install a «Mi Smart Home» application, locate and download it
from APP Store or scan the QR-Code. Open the App, click on icon
«My Device» and add fan to your list of «Mi Smart Fan». After
successfully adding a fan, you'll find it in the «Smart Devices»
list. Turn offline fan mode use in a mobile application, also set the
«degree of tilt of the fan», «time of the device» and perform many
other settings.
This device is already in Mi Smart Home list of devices, support
MIUI system and can interface and interact with other Mi Smart
Home devices.
To find out more information about operation of this device or to
purchase other smart devices, register in Mi Smart Home APP.
Wi-Fi reset
If your smartphone is not connected to the fan, please
simultaneously press the «regulation of wind speed» and «fan tilt
adjustment» buttons and hold for 5 seconds until you hear a beep,
indicating successful reset of Wi-Fi settings.
Cleaning of fan
Turn off the device, disconnect a power supply, remove battery, then it is possible to disassemble
and clean fan parts.
Parts, you may wash with water
The following shows parts, that can be washed with clean water or diluted neutral detergent. Use a
soft cloth or sponge with a special detergent.
front protective mesh
Parts, you cannot wash with weater
The following shows the parts, that can be cleaned with a
soft, dry cloth.
Do not use water to clean these
parts.
Do not use detergents, gasoline
or alkaline cleaners.

Maintenance

rear protective mesh
propeller
securing screw of protective mesh
Propellers fixing screw
Fan base
Motor unit and stand