Advertisement
Installing of a stand of the fan
Insert the stand pole to the special
socket on the device base.
Installing the rear fan protective mesh
While installing the rear protective mesh to fan
motor module, two red triangles must match.
Mi Smart Fan
Open the main block of the fan
Turn the front protective mesh anti-
clockwise to remove it.
Installing the front fan protective mesh
While installing the front protective mesh, turn it
clockwise until two marks on lower side match.
Mi Smart Fan
Before using the device, read the
instructions carefully
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Xiaomi Mi Smart Fan
Summary of Contents for Xiaomi Mi Smart Fan
- Page 1 Mi Smart Fan Mi Smart Fan Before using the device, read the instructions carefully Open the main block of the fan Installing of a stand of the fan Insert the stand pole to the special Turn the front protective mesh anti- socket on the device base.
- Page 2 Overview Fan tilt adjustment button Wi-Fi indicator Mode indicators Stand Accessories 1. Motoer module with stand; 2. Main fan block; Power cable slot Base 3. Base of fan; 4. Paddle fixing screw; 5. Rear protective mesh fixing screw; 6. Hex wrench; 7.
-
Page 3: Installation Of Stand
Installation of stand Open the main fan block Unpack the main fan unit. Turn the front protective mesh anti-clockwise to remove it and remove a paddle. Insert (7) screw of stand into slot fan main block Insert the fan stand into the Using (6) hex wrench, screw (7) special rack slot up to the limit... -
Page 4: Installing The Propeller
Installation of the rear protective mesh Installation of the front protective mesh Install the rear protective mesh when two red triangle on it and motor block To install the front protective mesh, turn it clockwise until two marks on lower match, then scroll clockwise. -
Page 5: Installing The Battery
Installing the battery Using On/Off/Wind speed ajusting On/Off Click on the button, the fan turns on; fan remembers settings after last use of the device. After first use, disconnect it from the power supply and turn on to mode 1. Before performing these steps, we strongly recommend to switch off the fan and disconnect it from the power supply. -
Page 6: Battery Usage
Status of Indicators Usage Fan tilt ajusting Mode Fan is off 1 mode 2 mode 3 mode 4 mode Click on the button to adjust a degree of inclination of the fan. After completing all battery the settings, you can turn off the fan. The unit automatically saves all settings. Indicators Indicators of stand Mode... -
Page 7: Maintenance
APP Store or scan the QR-Code. Open the App, click on icon «My Device» and add fan to your list of «Mi Smart Fan». After Turn off the device, disconnect a power supply, remove battery, then it is possible to disassemble successfully adding a fan, you’ll find it in the «Smart Devices»... -
Page 8: Main Parameters
Fing and fix faults Main parameters Presence of toxic and hazardous substances Cautions Transportation Before transporting the device, turn it off and unplug it from a power supply; Ensure reliable and durable installation of the fan, the device to prevent falling and injury. Installation It is highly recommended to perform an installation of the device, following the instructions O: toxic and harmful substances in all components of the device are... -
Page 9: Warranty Terms
Battery If for a long time you not use the device, remove a battery and charge it once Mi Smart Fan Quality Assurance: 12 months from the date of signing the warranty card. every 6 months; Store battery in a cool dry place, avoid contact with it to direct sunlight or leave it in •...
Need help?
Do you have a question about the Mi Smart Fan and is the answer not in the manual?
Questions and answers