Care And Maintenance - Xiaomi Mi Smart Standing Fan 2 Pro User Manual

How to Use
Wi-Fi Status & Indicator Description
Awaiting
Wi-Fi Status
Connection
Blinking
Indicator
orange
Rese ing Wi-Fi Connection
Simultaneously press and hold the bu ons
hear a long beep, the Wi-Fi connection has been reset successfully
and then the fan is awaiting a connection. The Wi-Fi connection
needs to be reset on the circumstances listed below:
The Xiaomi account that the fan is paired with has been changed.
The router that the fan is connected to has been changed.
The account or password of the router that the fan is connected to has been changed.
The Mi Home/Xiaomi Home app is unable to control the fan.
Enabling/Disabling Wi-Fi
Simultaneously press and hold the bu ons
until you hear a notification sound, and then the Wi-Fi is enabled or
disabled.
Child Lock Function
To disable the function of child lock, go to the page of Mi Smart
Standing Fan 2 Pro in the Mi Home/Xiaomi Home app, or simultaneously
press and hold the bu ons
Note: Rese ing the Wi-Fi connection or unplugging and plugging in the fan again can also
disable this function.
Connecting Connected Fail to Connect
Blue
Blinking blue
and . Once you
and for seven seconds
and until you hear a long beep.
Care & Maintenance
Washable Parts
The parts listed below can be cleaned with a so cloth or sponge
using water or neutral detergent.
Orange
11
Front Grille
Note: Stop and unplug the fan, then disassemble it and clean its parts. A er cleaning,
make sure all parts are completely dry before installing them and using the fan again.
Avoid direct sunlight.
Not Washable Parts
The parts listed below can be wiped clean with a so , dry cloth.
5
Fan Blade
Assembly Knob
Notes: Do not rinse the parts listed above with water.
Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts.
11
12 13
Fan Blade Assembly Rear Grille
9
4
Fan Base Charging Base
6
Rear Grille Knob
３ １
Lower Stand Motor &
Upper Stand