Attached Documents - CeraGem CGM MB-1101 User Manual

1. Explanation of mark, delivery, and storage
Classification
Form of electric shock protection
Degree of electric shock protection
Degree of protection from harmful invasion of water
Depending on the mode of operation
(Automatic Thermal Massager)
WITH RESPECT TO ELECTRIC SHOCK
FIRE, AND MECHANICAL HAZARDS ONLY
IN ACCORDANCE WITH UL60601-1/CAN/CSA C22.2 No. 601.1
47AB
V~ : AC (alternating current) voltage source
: TYPE BF APPLIED PART
: This way up
: Use no hooks
The disposal of waste products / residues, etc.
CERAGEM
Condition for Transport and Storage
Condition for leakage current value
* Pull the marked area to exchange the fuse (related to service engineer)
* The equipment has to be installed at place built protective device having appropriate breaking capacity
so that prospect short-circuit current do not exceed 40 A
42
TYPE BF APPLIED PART.
Ordinary
Continuous operation.
: Attention, consult Accompanying documents
: Keep dry
: Fragile ; handle with care
: General prohibition sign
Condition for Operation
Do not disassemble and contact the customer
service center when problem occurs with a fuse.
Capacity of a fuse: AC 250V, T6.3AL
Time-Lag,
6.3A,
Glass Body Fuse

2. Attached documents

Guidance and Manufacturer's declaration
- electromagnetic emission
The Model CGM MB-1101(CERAGEM CO., LTD. Automatic Thermal Massager)is
intended for use in the electromagnetic environment specified below.The
customer or the user of CGM MB-1101 should assure that it is used in such an
environment
Emission test Compliance Electromagnetic environment - guidance
The Model CGM MB-1101 uses RF energy
RF emissions
Group 1
only for its internal function. Therefore. Its
CISPR 11
RF emissions are very low and are not likely
to cause any interference in nearby electronic
equipment
The Model CGM MB-1101 is suitable for use
in all establishments, including domestic
Harmonics emission
establishments and those directly connected
N/A
IEC 61000-3-2
to the public low-voltage power supply
network that supplies buildings used for
Voltage fluctuation
N/A
domestic purposes.
IEC 61000-3-3
43