Turning On The Remote Control - CeraGem CGM MB-1101 User Manual

*
2. How to use the remote control

Turning on the remote control

Remote control must be held in the hand of the person using the device so that the
On/Off button can be accessed easily.
- To turn off the remote control OFF, press and hold the power key for more
than 1 second.
- The current strength and temperature are displayed.
- The internal projectors automatically move to the position of the head
when the remote control turns on.
- Refer to pages 25~28 for the mode selection.
20
2. How to use the remote control
Adjusting Strength
The strength of the internal projectors can be adjusted before or during use.
Check the current strength level.
Pressing the strength key causes the set point to flash.
After pressing the strength key, adjust the temperature
to the desired level using the Up/Down key.
Strength can be adjusted in 1~6 levels.
Check the changed strength set point on the remote
control display.
21