Contacting Huawei Technical Support - Huawei OceanStor T Series Quick Installation Manual

Hide thumbs Also See for OceanStor T Series:

Quick installation manual (21 pages)

Table Of Contents

Table of Contents

Installing front panels

Scenario 1 Installing the front panel for a 2 U device

6 Initializing the Storage System

After you have powered on the storage system, complete the following initialization steps:

1. Change the IP address of the management network port using the command-line interface (CLI). Before

doing this, connect the serial port on the controller enclosure to the maintenance terminal.

2. Log in to the OceanStor DeviceManager on the maintenance terminal.

3. On the DeviceManager, follow the Initial Configuration wizard to change the basic information,

configure the device time, disk domain, alarm notification, and import license files. If you do not perform

the initial configuration as prompted, follow-up configuration and use of services will be affected.

 For details about initializing the storage system, refer to the OceanStor S2600T Storage System

V200R002C20 Installation Guide.

 The default user name and password of the storage system are admin and Admin@storage respectively.

 You are advised to change the default password immediately after you have logged in to the storage

system for the first time and periodically change your password in the future. This reduces the password

leakage risks. For details about how to modify the password, see OceanStor

S2600T&S5500T&S5600T&S5800T&S6800T Storage System V200R002C20 Maintenance Guide.

7 (Optional) Installing Host Software

Install the following host software programs on the application server:

1. Initiator, an optional program for iSCSI host ports. For details about installing the Initiator program, refer to

the OceanStor S2600T Storage System V200R002C20 Installation Guide.

2. ReplicationDirector. For details about installing the ReplicationDirector, refer to the OceanStor

ReplicationDirector User Guide.

3. UltraPath, a multipathing program. For details about installing the UltraPath, refer to the OceanStor

UltraPath for Windows User Guide, OceanStor UltraPath for Linux User Guide, OceanStor UltraPath for

Solaris User Guide, or OceanStor UltraPath for AIX User Guide.

 Obtain the documentation for the ReplicationDirector and UltraPath from the delivery-attached CD-ROM.

After installing the device, you can log in to http://support.huawei.com/enterprise/, choose Support > Product

Support > IT > Storage > Disk Storage, and select the corresponding product model to obtain the Acceptance

Test Guide.