Vecow EXBC-1000 User Manual page 59

Intel xeon/core i7/i5/i3 processor 5.25" single board computer workstation-grade, 4 gige lan, 4 10g usb, 4 com, 1 pcie, sumit a, b
Table of Contents

Advertisement

4.4.1.3 PEG Port Configuration
Figure 4-4-1-3 : PEG Port Configuration
PEG port options for PCIe device.
4.4.2 PCH-IO Configuration
Figure 4-4-2 : PCH-IO Settings
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN
cannot be disabled if ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3
state).
S0 State : Always turn-on the system when power source plugged-in.
S5 State : Always turn-off the system when power source plugged-in.
©Vecow EXBC-1000 User Manual
BIOS SETUP
52

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exbc-1100eExbc-1100

Table of Contents