Philips GC4412/02 User Manual page 17

Problem
Water drips
from the
soleplate
after the
iron has
cooled
down or
has been
stored.
Flakes and
impurities
come out of
the
soleplate
during
ironing.
The red
light flashes
(specific
types only).
4239.000.6215.6.indd 17
Possible cause
You have used the
steam boost
function at a
temperature setting
below 3.
You have put the
iron in horizontal
position with water
still left in the water
tank.
Hard water forms
flakes inside the
soleplate.
The automatic shut-
off function has
switched off the
iron (see chapter
'Features', section
'Automatic shut-off
function').
EnGlish
Solution
Set the temperature dial to a
setting between 3 and MAX.
Empty the water tank.
Use the Calc-Clean function one
or more times (see chapter
'Cleaning and maintenance',
section 'Using the Calc-Clean
function').
Move the iron slightly to
deactivate the automatic shut-off
function. The red AUTO/OFF light
goes out.
17
23-10-09 10:05