Udp Client Instructions - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
3. Open the serial port assistant, select the correct COM port and baud rate, and click "network debugging assistant" to connect.
After connecting the device, carry out the communication test.

4.3.3 UDP client instructions

1. Set "network debugging assistant" to UDP (this upper computer does not distinguish between UDP client and UDP server),
local host IP to 192.168.4.100, and local host port number to 8887.
2. Set the device socket A1 network type to udpc (UDP client), the target IP is 192.168.4.100, and the target port is 8887. Click
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd
E810-DTU(1RS1E) User Manual
20