Setting The Temperature - Philips GC6026/03 User Manual

ENGLISH
8
Fast refill
C
1 First set the on/off switch (D) to 'off'.
2 Press the steam activator button until you no longer hear any
steam escaping from the appliance.
3 Keep the steam activator button pressed in and slowly unscrew
the cap of the steam tank by turning it anti-clockwise.This will
depressurise the steam tank.
4 Remove the mains plug from the wall socket.
5 Fill the steam tank as described in section 'Filling the steam
tank' and let the appliance heat up again.
Label with ironing
instructions
B
C
D
Z

Setting the temperature

Always place the steam tank on a stable, level and horizontal surface
Do not put the steam tank on the soft part of he ironing board.
Always place the iron on the iron stand. Do not put the hot iron on
the supply hose or the mains cord. Make sure the cord does not come
into contact with the hot soleplate.
C
1 Set the temperature dial to the required ironing temperature
by turning it to the appropriate temperature indication.
- Check the garment label for the required ironing temperature:
- 1
Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
- 1
Silk
- 2
Wool
- 3 Cotton, linen
Type of fabric
Synthetic fabrics, e.g. acetate,
acrylic, viscose, polyamide,
polyester, and silk
Wool
Cotton, linen
Please note: Z in the table
means that the article
cannot be ironed.
Temperature Steam
dial control
1
-
2 q
3 R