Honeywell TC-RPFM01 Implemenation Manual page 19

Step
1
Orient the Repeater Adapter so the top of the unit is over the top of the DIN
rail.
2
Slightly rotate the module to slip its top mounting flange on the top of the DIN
rail.
3
Press the module down flush with the DIN rail so its locking tab snaps into
place, securing the module to the rail. If necessary, you can use a
screwdriver to manually retract the lock while pressing the module firmly
against the rail and then releasing it when in position.
4
Leave the protective covers on the connectors until you are ready to make
the connections.
5
For redundant ControlNet media, repeat this procedure to mount a second
Repeater Adapter on a separate DIN rail.
R210 Experion PKS ControlNet Fiber Optic Implemenation Guide
10/04
Installing ControlNet Repeater Adapter
Action
Honeywell
ControlNet Fiber Media
9