Table of Contents
Advertisement
FLOOR CONSOLE INDOOR UNITS
INSTALLATION
Follow these key steps when selecting a location for the unit.
S
Select a place where cool air can be distributed
throughout the room.
S
Select a place where condensation water is easily drained
away.
S
Select a site that can handle the weight of the indoor unit.
S
Select a place which has easy access for maintenance.
Indoor Unit
The indoor unit should be sited in a place where:
1 The restrictions for the installation specified in the indoor
unit installation drawings are met.
2 Both the air intake and exhaust have clear paths.
3 The unit is not in the path of direct sunlight.
4 The unit is away from a heat or steam source.
5 There machine oil vapor source (this may shorten indoor
unit life).
6 Cool (warm) air is circulated throughout the room.
7 The unit is away from electronic ignition type fluorescent
lamps (inverter or rapid start type) as they may shorten the
remote controller range.
8 The unit is at least 3.28 ft. (1m) away from any television or
radio set (unit may cause interference with the picture or
sound).
NOTE: DO NOT install the air conditioner in the following
areas.
S
Do not install in areas with or near an abundance of oil.
S
Do not install in areas with an acid base area.
S
Do not install in areas with an irregular electrical
supply.
Indoor Unit Installation Drawings
The indoor unit may be mounted in any of the three styles shown
here.
Exposed
Mounting plate
Molding
Floor lnstallation
Wall Installation
Fig. 61 – Indoor Unit Installation Drawings
Half conceated
Concealed
Grid(field supply)
Securing the installation panel location
Schematic drawing of hooks:
Fig. 62 – Schematic Drawing of Hooks
Fig. 63 – Installation Paper Plank
34
INSTALLATION
PAPER PLANK
Hide quick links:
Advertisement
Table of Contents
