Certificate - Bahco IZO-D User Manual

CERTIFICATE

Certificate of Compliance
The IZO torque wrenches are in accordance with the
The test method and the equipment used for the calibration
is in conformity with the afore mentioned norm. International
traceability through calibration laboratories acc. to ISO 9000.
Contact your BAHCO sales representative for calibration services.
Calibration events are recorded in the wrench memory which
Equipment Required: A torque source, accurate to 1 % of reading.
GUARANTEE
The warranty period is 24 months from the date of purchase or date of
invoice and covers faulty parts, materials and defects from poor
workmanship.
If such a case should happen, please contact your local BAHCO Partner for
assistance together with proof of date of purchase of your tool.
Accessories for IZO-DM/ -DFM/ -DRM Part Number
Download CD for PC
RS232 Output Cable to PC
Patents: US 4,958,541 and Pending
4
requirements of:
ISO 6789, EN 26789
CALIBRATION
IMPORTANT !
provides evidence to void factory certification.
Note: To insure specified accuracy:
1. Apply load to the "V" notch on the handle.
2. On flex-ratchet models, the head must be straight.
3. Check calibration every 5000 cycles or annually.
EN 10204
IZO-DM-DOC
IZO-DM-C