Pepperl+Fuchs LAL-SRW3 Manual page 27

WARNING DEVICE LAL-SRW3
Commissioning
The following table contains a list of possible configuration settings.
Switches
DIP 1 NVF sensor
(NVF-104/34-PF)
DIP 2 SLU sensor
(SLU-103-**)
DIP 3 KVF sensor
(KVF-104-PF)
DIP 4 Acoustic alarm
DIP 5 Relay setting
DIP 6
DIP 5 Relay setting
DIP 6
DIP 5 Relay setting
DIP 6
DIP 5 Relay setting
DIP 6
DIP 7 Repeat alarm in 24
hours
DIP 8 Reset key (ALARM
RESET activation)
Description
ON connected
OFF not connected
ON connected
OFF not connected
ON connected
OFF not connected
ON Acoustic alarm on.
OFF Acoustic alarm off.
ON Relay 1 and 2 switch simultaneously in all alarm states.
Relay 1 and 2 are reset when none of the sensors have an
ON
alarm status. Pressing the "ALARM RESET" button switches
the relays again.
ON Relay 1 switches in all alarm states. Relay 1 is reset when
none of the sensors have an alarm status. Relay 2 switches if
OFF
the sensor NVF-104/34-PF has an alarm status. Relay 2 is
reset when the sensor NVF-104/34-PF no longer has an
alarm status. Pressing the "ALARM RESET" button switches
the relays again.
OFF Relay 1 switches in all alarm states. Relay 1 is reset when
none of the sensors have an alarm status. Relay 2 switches if
ON
the sensor SLU-103-** has an alarm status. Relay 2 is reset
when the sensor SLU-103-** no longer has an alarm status.
Pressing the "ALARM RESET" button switches the relays
again.
OFF Relay 1 switches in all alarm states. Relay 1 is reset when
none of the sensors have an alarm status. Relay 2 switches if
OFF
the sensor KVF-104-PF has an alarm status. Relay 2 is reset
when the sensor KVF-104-PF no longer has an alarm status.
Pressing the "ALARM RESET" button switches the relays
again.
ON Repeat alarm on. This also applies to the function of relays 1
and 2.
OFF Repeat alarm off.
ON "ALARM RESET" button is activated. The acoustic alarm and
the alarm relay can be reset.
OFF "ALARM RESET" button is deactivated. The acoustic alarm
and the alarm relay cannot be reset.
EN
EN - 25