Commissioning; Configuring The Warning Device Using Dip Switches - Pepperl+Fuchs LAL-SRW3 Manual

WARNING DEVICE LAL-SRW3

Commissioning

4
4.1
EN
24 - EN
Commissioning

Configuring the Warning Device using DIP Switches

The DIP switches are located on the right of the device (see chapter 2.3).
Figure 4.1 Overview of the warning device DIP switches
1 2 3 4 5 6
OFF
ON
NVF sensor
SLU sensor
KVF sensor
Acoustic alarm
Relay setting
Relay setting
Repeat alarm in 24 hours
Reset key
Refer servicing to qualified personel.
Do not change switch position when energized.
7 8