Final Check - Ikelite 6242.62 Instructions Manual

3. Attach one end of the fiber optic cord into one of the fiber optic ports
on the top of the housing. The Connector is a press-fit into the fiber
optic port. A second connector can be placed into the open fiber
optic port to activate a second strobe.
Fiber
Optic
Cord
4. Attach the other end of the fiber optic cord(s) to a compatible
strobe(s).
5. Set the strobe(s) to the appropriate setting based on manufacturer
recommendations.
6. Turn the strobe(s) on.

Final Check

1. Re-check the o-ring seal. The seal should form an even, solid line
around the back of the housing.
2. Turn on the camera and check all control functions.
3. Make sure that the camera can obtain focus and take a photo.
4. Take a test photo to ensure that your strobe(s) are functioning
properly.
5. Check battery life and open storage space on your memory card.
Connector
O-ring
Fiber Optic Ports
11