Rotabroach Element 14 1 Original Instructions Manual page 12

Element 14 Manual Original instructions Nov 2019
Locking Switch, The "OFF" Position
Important: We suggest that when the machine is not in use, the switch be locked in the "OFF" position using a
padlock (G) through the holes in the switch trigger (F).
F
G
Work piece clamping
Positions work in vise so that if jam occurs. The blade shall not tend to move the work piece in the
vise. Clamp it securely.
Angle bar should be clamped in a position as shown.
Generally, the saw cuts most efficiently if the blade is cutting the thinnest section at any time.
No
Yes
12