Note:
Ensure the oil filter gasket touches the
engine and then turn the oil filter an extra 3/4
turn.
3.
Fill the crankcase with the proper type of new
oil; refer to
Changing the Engine Oil (page
Servicing the Engine-Oil Cooler
Service Interval: Every 200 hours
1.
Remove the bolts holding the oil cooler to the
engine housing .
2.
Clean the inside of the oil cooler with a brush.
3.
Install the oil cooler to the engine housing.
Figure 48
g024213
1. Engine-oil cooler
g027477
39).
40
Figure 49
2. Bolts
g024213
g013011