Transporting The Machine - Toro Z Master Professional 5000 Series Operator's Manual

Figure 32
1. Vertical to push the
machine
4. Rotate the release valve levers horizontally to
run the machine (Figure
g024246
2. Horizontal to run the
machine
32).

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required
by law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous
and can lead to accidents, causing personal
injury.
Do not drive the machine on a public street
or roadway.
1. If you are using a trailer, connect it to the towing
vehicle and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Shut off the engine, remove the key, set the
brake, and close the fuel valve.
5. Use the tie-down loops on the machine to
securely fasten it to the trailer or truck with
straps, chains, cable, or ropes
1. Traction unit tie-down loops
29
(Figure 33).
Figure 33
g027406