Using The Fuel-Shutoff Valve; Starting And Stopping The Engine - Toro Z Master Professional 5000 Series Operator's Manual

Using the Fuel-Shutoff
Valve
The fuel-shutoff valve is located under the seat. Move
the seat forward to access it.
Close the fuel-shutoff valve for transport, maintenance,
and storage.
Ensure the fuel-shutoff valve is open when starting
the engine.
Figure 17
1. On
Starting and Stopping the
Engine
Starting the Engine
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
g008948
2. Off
Stopping the Engine
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
Let the engine idle at slow throttle (turtle) for 60
seconds before turning the ignition switch to the O
position.
22
Figure 18
g032328
FF