Dc Power Cables; Installing Ignition Sense Cable; Table 42: Dc Power Cables - Motorola Malux MTM5x00 Series Installation Manual

Hide thumbs Also See for Malux MTM5x00 Series:
Table of Contents

Advertisement

Postrequisites: See the following table for power cables available for this radio.
3.3.1

DC Power Cables

Table 42: DC Power Cables

Number
Description
GKN6270_
Power Cable to battery with fuse 10 A
GKN6274_
Power Cable to battery with fuse 10 A
6500139767
Fuse 10 A for Power Cable
6580283E02
Fuse 4 A for Ignition Sense Cable
6505663R02
Fuse 2 A for Y-Cable
CAUTION: In cases of blown fuses, replace only with fuses of identical value. Never insert ones
of different values.
NOTICE: For more information on ignition cables, see section "Installing Ignition Sense Cable".
The Ignition Sense Cable allows the radio to be turned on and off by the vehicle ignition switch.
3.4

Installing Ignition Sense Cable

The PMKN4120_ Ignition Sense Cable allows the terminal to be turned on and off by the vehicle
ignition switch.
CAUTION: In cases of blown fuses, replace only with fuses of identical value. Never insert ones
of different values. Ensure that the fuse is removed during cable installation.
Procedure:
1 Plug the lead of the Ignition Sense Cable with the crimped on the terminal into #25 socket of the
accessory plug.
2 Route and secure the cable with the attached tie wrap.
3 Connect the other lead of the accessory cable to the ignition switch of the vehicle.
4 Insert the fuse into the fuse holder and close the cover.
Send Feedback
Chapter 3: Vehicle Preparation
Rating
12V Power Cable to Battery, Length: 3 m
12V Power Cable to Battery, Length: 6 m
68015000181-LB
43

Advertisement

Table of Contents
loading

Table of Contents