Call Handling; Hold; Transfer; Conference - Mitel SUPERSET 4025 User's Information Manual

To store a personal Speed Call number:
Lift the handset.
Dial.
Enter an index number between 00 and.
Dial the number to be stored (press HOLD between digits to create a pause during dialing – press
HOLD more than once to lengthen the pause).
Hang up.
To place a call on hold:
Press HOLD.
To retrieve a call from hold:
Lift the handset.
Press the flashing line key.
To retrieve a call from hold at another station:
Press the flashing line key.
– or –
Dial *24 and the number of the station that placed the call on hold.
To transfer an active call:
Press TRANS/CONF
Dial the number of the third party.
Do one of the following:
To complete the transfer, hang up.
-
- To announce the transfer, wait for an answer, consult and hang up.
To cancel transfer, press CANCEL.
-
To form a conference when a two-party call is already in place, or to add another party to an existing

conference:

Press TRANS/CONF.
Dial the number of the next party.

CALL HANDLING

Hold

Transfer

Conference
5