Table of Contents
Advertisement
Safety and Maintenance
Safety & Warning
•
Make sure all nuts, bolts, and screws are tightened prior to use.
•
Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
•
Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
•
Check for loose parts and components and make proper adjustments prior to use.
•
Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends are found,
DO NOT use the unit and contact our CUSTOMER SUPPORT.
•
Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be snagged into
any portion of the bike when the unit is in motion. Failure to follow these instructions could result in serious injury,
including the loss of fingers.
•
Always wait for the pedals and other moving parts (which can gain great momentum during riding) to come to a
complete stop before dismounting the unit to avoid serious injury.
Maintenance & Care
•
Please review all safety instructions and warnings in this entire Owner's Manual, as well as any safety/warning labels
affixed to the product before use.
•
To avoid rust or corrosion to the flywheel caused by moisture and sweat, we advise wiping and drying the flywheel
and surrounding parts with a dry absorbent towel after each workout session.
•
Do not use solvent cleaners. If you are in any doubt, do not use your cleansing product and contact CUSTOMER
SUPPORT.
•
For any replacement warning labels, please contact our CUSTOMER SUPPORT at
1 (888) 266-6789 or 1 (909) 598-9876, or mail in a written request to:
Body Flex Sports, Inc.
21717 Ferrero Parkway
Walnut, CA 91789
More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the
Owner's Manual under the "CUSTOMER SUPPORT" section.
BST800
Page 14
Hide quick links:
Advertisement
Table of Contents
