Related Manuals for Body Flex Sports Body Power BST800 StepTrac
Summary of Contents for Body Flex Sports Body Power BST800 StepTrac
- Page 1 BST800 STEPTRAC™ ELLIPTICAL STEPPER WORKOUT TRAINER WITH CURVE-CRANK® TECHNOLOGY This product is intended for indoor, home use only and is not to be used in a commercial setting. OWNER’S MANUAL...
- Page 2 This page is left blank intentionally...
- Page 3 PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE USE & REFERENCE. DO NOT DISCARD. WARNING: SERIOUS INJURIES AND EVEN DEATH CAN OCCUR IF THE PROPER SAFETY PRECAUTIONS ARE NOT FOLLOWED. The diagram below highlights and reviews many of the important Safety and Warning labels also found on the unit. Please ensure any user of the unit familiarizes themselves with this Safety and Warning guidelines before use.
-
Page 4: General Information
Assembling Tools Please contact us by any of the following means : - Ruler with both Metric and English measurements Body Flex Sports, Inc. - 2 x Adjustable Wrenches 21717 Ferrero Parkway, Walnut, CA 91789 - 1 x Philips (”Crosshead”) Screw Driver... -
Page 5: Before Assembly
Before Assembly WARNING 1. Take a few minutes to familiarize yourself with the parts and hardware included with your product. 2. The assembly may require two people. 3. Check the frame for any damage and check any wiring (if present) for rips or tears. If you detect damage, rips, or tears, please contact our Customer Support Team before beginning any assembly. -
Page 6: Part Listing
Part Listing The following parts list describes all of the parts illustrated in the exploded diagram on the following page. PLEASE NOTE: most of these parts are already pre-assembled on your unit. # Description # Description Main Frame Left Crank Front Post Right Crank Left Coupler Bar... -
Page 7: Exploded View
Exploded View The following diagram is provided to help you familiarize yourself with the parts and hardware that will be used during the assembly process. : : Not all of the parts and hardware you see here will be used while you are assembling the machine PLEASE NOTE because some of these items are already pre-installed. -
Page 8: Hardware And Tool List
Hardware and Tool List The following hardware is used to assemble your unit. Please take a moment to familiarize yourself with these items. PLEASE NOTE: Most of these parts are already pre-assembled on your unit. Do not be alarmed if you see parts on this page that are not included in your hardware packet. -
Page 9: Assembly Step
Assembly STEP 1 Hardware Required Hardware Required Hardware Required #78 Bolt (M8x20 mm) #104 Bolt (M8x40 mm) #112 Bolt (M8x45 mm) #88 Arc Washer (M8) #72 nut M8 4 pcs 1 pc 8 pcs 8 pcs 8 pcs #111 Screw (ST4.2x15 mm) #97 Spring Washer (M8) #106 Bolt (M8x42 mm) #98 Washer (M8) - Page 10 Assembly STEP 2 Hardware Required Hardware Required #81 Hex Bolt (M8x50 mm) #72 Nylon Nut (M8) #24 Wheel 4 pcs 4 pcs 2 pcs #55 Left Pedal Hinge Bolt 1 pc #56 Right Pedal Hinge Bolt 1 pc #94 Left Nylon Nut (1/2") 1 pc #115 Bolt Cap #100 Bolt (φ10x30xM8x12 mm) #102 Wave Washer (1/2")
- Page 11 Assembly STEP 3 Hardware Required #79 Bolt (φ10x11xM8x12 mm) #102 Wave Washer (1/2") #101 D Shape Washer (1/2") #78 Bolt (M8x20 mm) 2 pcs 2 pcs #80 Bolt (φ10x11xM8x15 mm) #103 Washer (M8) 2 pcs #97 Spring Washer (M8) 2 pcs 2 pcs 2 pcs 2 pcs...
- Page 12 Assembly STEP 4 Hardware Required #84 Carriage Bolt (M8x40 mm) 4 pcs #105 Bolt (M8x25 mm) #88 Arc Washer (M8) #85 Nut (M8) 4 pcs 2 pcs 4 pcs Attach Left Handle Bar (#12) to the Left Coupler Bar (#03), secure with two Carriage Bolts (#84) two Arc Washers (#88) and two Nuts (#85).
- Page 13 Assembly STEP 5 Hardware Required #77 Screw (M5x8 mm) #70 Pop-Pin (M8x50 mm) 1 pc 4 pcs pre-assembled Remove the four Screws (#77) that are pre-assembled on the back of the Monitor (47), set them aside nearby. Attach the Monitor (#47) to the bracket on the Front Post (#02), secure with four Screws (#77).
-
Page 14: Computer Operation
Computer Operation Key Function MODE : Press this button to select the display function of your choice. RESET : Hold MODE button for 3 seconds to reset all value to zero. UP DOWN : Press UP DOWN to set workout level Operation Procedures FUNCTIONS SCAN... - Page 15 Computer Operation How To Install and Replace Batteries 1. Open the battery door on the back of the computer. 2. The computer operates on two AAA batteries (included). Refer to the illustration to install or replace the batteries. NOTE : 1.
-
Page 16: Safety And Maintenance
• For any replacement warning labels, please contact our CUSTOMER SUPPORT at 1 (888) 266-6789 or 1 (909) 598-9876, or mail in a written request to: Body Flex Sports, Inc. 21717 Ferrero Parkway Walnut, CA 91789 More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the Owner’s Manual under the “CUSTOMER SUPPORT”... - Page 17 Warm-Up Instructions Before use, you must read and understand all instructions & warnings stated in this Owner’s Manual as well as posted on the equipment. Before beginning any exercise program including the following flexibility exercises, please consult with your physician. The following flexibility exercises are provided to you as a means to prevent injury while you are exercising.
- Page 18 Warm-Up Instructions Shoulder Stretch Quadriceps Stretch Calf Twister 1. Bring your right hand over your 1. Stand on your left leg and hold 1. Place both hands against a wall right shoulder to the onto a support with your left to aid your balance.
- Page 19 This page is left blank intentionally...
- Page 20 Please fill in the information below and keep this manual along with your sales receipt as proof of purchase. Serial Number : Date of Purchase : Retailer : Body Flex Sports, Inc. 21717 Ferrero Parkway Walnut, CA 91789 Phone : 1 (888) 266-6789 : 1 (909) 598-6707 Email : info@bodyflexsports.com...